Curso Sensibilización Hardware Libre (Unidad 002)

002/04 Actividad 004

En esta actividad, se plantea el uso de la librería de arduino LCD, en una primera aproximación se plantea el uso de pantalla LCD, donde se visualice un contador que se reinicie cada 100 iteraciones, para luego realizar otras actividades,

Montaje del programa para Manejo de LCD

• enlace al código

• enlace a diagrama

Circuito de Conexión -LCD-

Materiales

• Pantalla LCD
• Arduino
• Resistencia 220 ohm

Montaje del programa para Manejo de LCD y 4 Pulsadores

• enlace al código

• enlace a diagrama

Circuito de Conexión -LCD+4pulsar-

Materiales

• Pantalla LCD
• Arduino
• Resistencia 220 ohm
• 4 Pulsadores
• Resistencia 1100 ohm

Manejo de arreglo de siete segmentos

/*
 * Print "HOLA" into 7 segment array display
 *
 * (c) 2010 Alberto Medrano (alberto@cenditel.gob.ve)
 * CENDITEL Foundation
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

int potPin = 0;    // select the input pin for the potentiometer
int val = 0;

int common_0 = 12;
int common_1 = 11;
int common_2 = 10;
int common_3 = 9;
int bcd_A = 8;
int bcd_B = 7;
int bcd_C = 6;
int bcd_D = 5;
int bcd_E = 4;
int bcd_F = 3;
int bcd_G = 2;

void setup() {
  pinMode(common_0, OUTPUT);  // Declarando Salidas
  pinMode(common_1, OUTPUT);  // Declarando Salidas
  pinMode(common_2, OUTPUT);  // Declarando Salidas
  pinMode(common_3, OUTPUT);  // Declarando Salidas
  pinMode(bcd_A, OUTPUT);  // Declarando Salidas
  pinMode(bcd_B, OUTPUT);  // Declarando Salidas
  pinMode(bcd_C, OUTPUT);  // Declarando Salidas
  pinMode(bcd_D, OUTPUT);  // Declarando Salidas
  pinMode(bcd_E, OUTPUT);  // Declarando Salidas
  pinMode(bcd_F, OUTPUT);  // Declarando Salidas
  pinMode(bcd_G, OUTPUT);  // Declarando Salidas

  digitalWrite(common_0, LOW);
  digitalWrite(common_1, LOW);
  digitalWrite(common_2, LOW);
  digitalWrite(common_3, LOW);
}

void loop() {
  val = analogRead(potPin);    // read the value from potentiometer
  digitalWrite(bcd_A, LOW);    // H
  digitalWrite(bcd_B, HIGH);
  digitalWrite(bcd_C, HIGH);
  digitalWrite(bcd_D, LOW);
  digitalWrite(bcd_E, HIGH);
  digitalWrite(bcd_F, HIGH);
  digitalWrite(bcd_G, HIGH);
  digitalWrite(common_0, HIGH);
  delay(val);
  digitalWrite(common_0, LOW);

  val = analogRead(potPin);    // read the value from potentiometer
  digitalWrite(bcd_A, HIGH);  // O
  digitalWrite(bcd_B, HIGH);
  digitalWrite(bcd_C, HIGH);
  digitalWrite(bcd_D, HIGH);
  digitalWrite(bcd_E, HIGH);
  digitalWrite(bcd_F, HIGH);
  digitalWrite(bcd_G, LOW);
  digitalWrite(common_1, HIGH);
  delay(val);
  digitalWrite(common_1, LOW);

  val = analogRead(potPin);    // read the value from potentiometer
  digitalWrite(bcd_A, LOW);  // L
  digitalWrite(bcd_B, LOW);
  digitalWrite(bcd_C, LOW);
  digitalWrite(bcd_D, HIGH);
  digitalWrite(bcd_E, HIGH);
  digitalWrite(bcd_F, HIGH);
  digitalWrite(bcd_G, LOW);
  digitalWrite(common_2, HIGH);
  delay(val);
  digitalWrite(common_2, LOW);

  val = analogRead(potPin);    // read the value from potentiometer
  digitalWrite(bcd_A, HIGH);  // A
  digitalWrite(bcd_B, HIGH);
  digitalWrite(bcd_C, HIGH);
  digitalWrite(bcd_D, LOW);
  digitalWrite(bcd_E, HIGH);
  digitalWrite(bcd_F, HIGH);
  digitalWrite(bcd_G, HIGH);
  digitalWrite(common_3, HIGH);
  delay(val);
  digitalWrite(common_3, LOW);
}